8
9
The fan speed can be adjusted manually or set to automatic.
Press the "FAN" button until the desired fan speed is shown on
the LCD screen (displayed below the temperature display), the
available fan speeds are Auto / Low (4 bars) / Med (8 bars) /
High (12 bars).
Select "AUTO" if you wish the fan speed to be adjusted automatically
by the appliance during AUTO, COOLING, HEATING modes.
Fan Speed
In periods of high humidity this mode removes excess moisture
from the room, in order to prevent mould and mildew.
Press the MODE button to select Dry mode.
NOTE:
In the DRY mode, you are unable to control the room temperature
and fan speed. It is automatically controlled by the unit.
DRY
Dry Operation (Dehumidifying)
Adjusting Air Flow Direction
Louvres
Louvre angle
Deflectors
ADJUSTING VERTICAL AIR FLOW
Continuous Circulation
1. To adjust the direction of the air flow vertically for more even air
circulation, press the
button, this activates a continuous
cyclic movement of the louver. When cycling, the swing icon is
shown on the LCD screen.
Fixed Direction
1. To adjust the direction of the air flow vertically in a fixed
direction, press the button once to activate a
continuous cyclic movement of the louver. The swing icon is
shown on the LCD screen.
2. When the desired flow direction has been reached press the
button again to stop the movement of the louver.
The swing icon is no longer shown on the LCD screen.
3. Repeat the above steps to further adjust the flow direction or
press the button once to return to a continuous cyclic
movement of the louvre.
SWING
SWING
SWING
SWING
SWING
ADJUSTING HORIZONTAL AIR FLOW (where fitted)
Continuous Circulation
1. To adjust the direction of the air flow horizontally for more even
air circulation, press the button to enable a continuous
cyclic movement of the vanes. When cycling, The swing icon is
shown on the LCD screen.
Fixed Direction
1. To adjust the direction of the air flow vertically in a fixed
direction, press the button once to enable a continuous
cyclic movement of the vanes. The swing icon is shown on the
LCD screen.
2. When the desired flow direction has been reached press the
button again to stop the movement of the vanes. The
swing icon is no longer shown on the LCD screen.
3. Repeat the above steps to further adjust the flow direction or
press the button once to a return to a continuous cyclic
movement of the vanes.
SWING
SWING
SWING
SWING
Fan
NOTE:
When the horizontal / vertical louver swing moves to a position which may adversely affect the cooling or heating
effect of the air conditioner, it may automatically change the horizontal or vertical position.
CAUTION
DO NOT attempt to adjust the louvre manually as this can result in damage to the louver movement mechanisms.
CAUTION
DO NOT attempt to adjust the louver manually as this can result in
damage to the louver movement mechanisms.
SWING
