ON
When the appliance is off (standby):
1. Press the "ON / OFF" button to turn on appliance. The appliance
will begin to operate.
2. All current operational settings and modes status are shown on
the LCD screen.
NOTE:
When the appliance is turned on via "ON / OFF" button it will
return to operation using the last operational models and settings.
OFF
When the appliance is running:
1. Press the "ON / OFF" button to turn off appliance. The appliance
will be placed into standby.
2. The previous operation mode is shown on the LCD screen.
System Operation
6
7
Room Temperature
Operation Mode
20
23
23
20 ~26
Set Temperature
18 ~24
Dry Mode
Heating Mode
In AUTO mode, you cannot adjust the temperature; however you are
allowed to increase 1 or 2
from set temperature by pressing
TEMP UP button and to decrease 1 or 2
from set temperature by
pressing TEMP DN button.
NOTE:
In this mode, ECO and TURBO functions are not available.
AUTO
1. Press the ON / OFF button to turn on appliance.
2. Press the MODE button to select Auto.
3. To cancel the "AUTO" mode and return the appliance to manual
control select another mode.
The system will automatically select the MODE as per the table
below.
Auto Mode Operation
27
Cooling Mode
1. Press the MODE button to select COOLING and HEATING mode.
2. Press the TEMP UP / DN buttons to set the desired temperature.
The temperature can be set within a range of 16 ~ 31 in
0.5
increments.
3. Press the FAN button to select the fan speed in four steps- Auto,
Low, Med, or High.
NOTE:
The indoor unit display shows the temperature setting in 1
increments only.
COOL
HEAT
Cooling / Heating Operation
FAN
1. Press the MODE button to select Fan mode.
2. Press the FAN button to select the fan speed in three steps -
Low, Med, or High.
NOTE:
In the FAN mode, Swing operations for air direction can still be
adjusted; however you are unable to control the room
temperature.
Fan Only Operation
