ENGLISH
USER MANUAL
BRITEQ
®
3/9
EXPO CANNON
DESCRIPTION:
1. MAINS INPUT:
equipped with original Neutrik PowerCON
®
. Connect the supplied mains cable or any
PowerCon
®
extension cable here.
2. MAINS OUTPUT:
used to daisy chain the power to several other projectors. Always pay attention to the
maximum load while adding projectors! Special Multi cables (PowerCON
®
+ DMX XLR-cables are
optionally available: see our website!)
3. MAINS FUSE:
protects the unit in case of electrical problems, always use the prescribed fuse!
4. DMX IN/OUT:
3pin in/outputs are available to daisy chain the projector with other units that will be
controlled by a DMX-controller.
5. DISPLAY & BUTTONS:
Backlit alphanumeric OLED-display and four buttons to select different options
of the setup menu:
•
MENU-button:
used to browse the different menu options or to exit a menu option.
•
▼-button:
used to go to the next menu option or to decrease a parameter value.
•
▲-button:
used to go to the previous menu option or to increase a parameter value.
•
ENTER-button:
used to select a menu option or confirm a setting.
6. HANGING BRACKET:
ready to be used with an optional OMEGA bracket (order code: 2677) and
equipped with knobs on both sides to fasten the unit.
7. SAFETY EYE:
used to attach a safet
y cable when the unit is rigged, see paragraph “overhead rigging”.
8. FROST FILTER:
makes the beam more even, with softer edges. Make sure that the locking clip is used
to keep the frost filter in place.
9. BARN DOORS:
They prevent the distinctive scatter of light from spilling into areas where it is not
wanted, such as the eyes of audience members. Just rotate the barndoor leafs in the desired position.
10. LOCKING CLIP:
The clip is used to keep the barndoor and color frame in place. Press the clip aside to
open it.
