ENGLISH
OPERATION MANUAL
BRITEQ
®
3/11
BT-NONABEAM
DESCRIPTION:
1. MAINS INPUT:
equipped with original Neutrik PowerCON TRUE1
®
. Connect the supplied mains cable or
any PowerCON TRUE1
®
extension cable here.
2. MAINS OUTPUT:
used to daisy chain the power to several other projectors. Always pay attention to the
maximum load while adding projectors! Special Multi cables (PowerCON TRUE1
®
+ DMX XLR-cables
are optionally available: see our website!)
3. MAINS FUSE:
protects the unit in case of electrical problems, press the button to re-arm if needed!
4. DMX IN/OUT:
both 3pin and 5pin in/outputs are available to daisy chain the projector with other units
that will be controlled by a DMX-controller.
5. DISPLAY & BUTTONS:
alphanumeric OLED-display and backlit touch keys to select different options of
the setup menu:
•
MENU-button:
used to enter/exit the setup menu.
•
▼-button:
used to go to the next menu option or to decrease a parameter value.
•
▲-button:
used to go to the previous menu option or to increase a parameter value.
•
ENTER-button:
used to select a menu option or confirm a setting.
6. COOLING FANS:
due to the high power it is very important to make sure that the temperature controlled
fans and ventilation openings always remain free to maintain optimal cooling!
7. OMEGA BRACKETS:
installation points for the fitting of omega brackets. For maximum flexibility the
omega brackets (2pcs included) can be installed at different locations. Also used to fix several projectors
in a line to create a light curtain.
8. HANGING BRACKET:
the included hanging bracket can be easily installed/removed using 4 quarter-
turn quick locks.
