Briteq BEAMBAR10-RGBW, Operation Manual

Page: 8 / 88

ENGLISH OPERATION MANUAL
BRITEQ
®
6/84 B10-RGBW
[SLAVE MODE]
Used to set the projector as slave in a master/slave setup.

Press the [MODE] or
↑/↓buttons until SLAVE MODE is showing on the display.

Connect the projector to a master.
Note: only to be used when the DMX-line is exclusively equipped with the same projector models.
[SOUND MODE]
Used to set the projector to standalone sound mode with different chases playing in endless loops.
Press the [MODE] or
↑/↓buttons until “SOUND MODE” is shown on the display.

Press the [ENTER] button: the sensitivity of the microphone (SENS) can be set from 00 to 31.

Use
↑/↓ buttons to change the value.

Press the [ENTER] button: the repetition rate (REP) of the chases can be set from 00 to 99.

Use
↑/↓ buttons to change the value.
[AUTO RUN] (SIMPLE AUTO MODE)
Used to set the projector to standalone auto mode with different chases playing in endless loops.
Press the [MODE] or
↑/↓buttons until “AUTO RUN” is shown on the display.

Press the [ENTER] button: the playback speed of the chases can be set from 00 to 99.

Use
↑/↓ buttons to change the value.

Press the [ENTER] button: the repetition rate (REP) of the chases can be set from 00 to 99.

Use
↑/↓ buttons to change the value.
][EFFECT MODE]
Used to set the desired effect mode while used as master.

Press the [MODE] or
↑/↓buttons until the desired function is showing on the display.

Press the [ENTER] button: the values can be changed

Use
↑/↓ buttons to selected the desired mode: 01. to 13.XXXXX: (different chases, including color fade,
color change, effects, …)

Once the correct option shows on the display, press the [ENTER] button to save it.

Use
↑/↓ buttons to select the desired
playback speed from 01 (very slow) to 99 (fast).

Once the correct value shows on the display, press the [ENTER] button to save it.

Use
↑/↓ buttons to select the desired
strobe speed from 00 (NO strobe) to 99 (fast).

Once the correct value shows on the display, press the [ENTER] button to save it.
[FLOW INVERT MODE]
Used to change the running direction of the chases.

Press the [MODE] or
↑/↓buttons until “FLOW INVERT” is shown on the display.

Use
↑/↓ buttons to toggle between ON and OFF.
[STATIC COLOR MODE]
Used to set the desired fixed color while used as master: 9 preset 1 custom color.

Press the [MODE] or
↑/↓buttons until the desired function is showing on the display.

Press the [ENTER] button: the values can be changed

Use
↑/↓ buttons to selected the desired color:

COLOR WW warm white 3200K

COLOR CW warm white 5600K

RED

ORANGE

YELLOW

GREEN

CYAN

BLUE

PURPLE

COLOR SET this is a color that can be set by the user. Follow these steps:

Press the [ENTER] button: the display shows the value (000-255) for RED. (change with ± buttons)

Press the [ENTER] button: the display shows the value (000-255) for GREEN. (change with ± buttons)

Press the [ENTER] button: the display shows the value (000-255) for BLUE. (change with ± buttons)

Repeat these steps until you have the desired values. The settings will be automatically saved.