21
HOW TO INSTALL
REARW
ARD F
ACING
J. Fit the attachment clip to the anchor fitting as shown
right. Make sure to remove as many twists as
possible from the upper anchorage strap.
K. Tighten adjustable upper anchorage strap by pulling
adjustment strap to remove slack, but do not
over-tighten causing the restraint base to lift off the
vehicle seat. This will usually be done once the child
has been harnessed into the seat.
L. Roll up excess strap tightly so the webbing is thick
enough to be held in the storage band.
Attachment Clip
Car's Anchor Fitting
Pull Adjustment
Strap to remove
slack
Fully press Adjuster Button (1)
while pulling Upper Anchorage
Strap (2) to lengthen.
Storage
Band
Roll up excess
strap tightly so the
webbing is thick
enough to be held
in the storage band.
2
1
