25
HOW TO USE
REARW
ARD F
ACING
Lower shoulder height marker hidden
when headrest is the lowest position
Adjustable
Headrest
Harness
shoulder straps
Slackened Upper
Anchorage Strap
Adjuster for the Upper
Anchorage Strap
Adjuster Strap
Harness
Adjustment Lever
Car's
Anchor
fitting
Harness Tongue Holders
IMPORTANT :
Always ensure the child’s arms and legs are free. Never wrap child in a blanket before placing in
restraint.
PLACING CHILD INTO RESTRAINT
A. Ensure the headrest and shoulder straps are adjusted to the correct height for your child (see page
13).
B. Extend the upper anchorage strap and allow the straps to fall to the sides of the restraint for easy
access to the child.
C. Slacken harness straps by pushing and holding the harness adjustment button, grasping BOTH
shoulder harness straps and pulling out the desired amount of slack. Release harness adjustment
button when there is enough slack and place the buckle tongues over the side of the seat so that
the child does not lay on them.
D. Lay child on their back into restraint and fit harness as shown. Make sure the child is dressed to
allow harness buckle to be pulled up between child’s legs e.g. a jump suit.
