Instructions for Installation & Use
43
HOW TO USE
1. The shoulder straps must be positioned in slots which are nearest to the child's shoulders, but not lower
than the child's shoulders. There is only one set of slots so the seat will always have the shoulder straps in
place once the headrest is positioned correctly.
2. The padded insert may be used for smaller babies in rearward facing mode.
3. Discontinue the use of the padded insert if there is insufficient room for the child or shoulders have
reached the lower shoulder height marker.
When positioning baby into the restraint make sure baby's back is fully supported onto the flat section and
the baby's nappy area (bottom) is resting in the bottom curvature as shown. It is recommended that bulky
nappies are not used when baby is travelling in the restraint as they can cause incorrect positioning of the
baby's back in the restraint.
REARWARD FACING
Bottom curvature of
child restraint
Flat section of
child restraint