Instructions for Installation & Use
89
INSTALLATION OF CAR'S UPPER
ANCHOR FITTING
Consult the vehicle owner’s handbook for location of anchorage fittings or anchorage points and the
possible use of spacers. Some vehicles may have an anchor fitting fitted by the vehicle manufacturer. If
anchorage points cannot be found refer to car manufacturer or local child restraint fitting station or traffic
authority for optimum position of upper anchorage point and the use of spacers.
TOP TETHER STRAP
IMPORTANT INSTALLATION NOTE:
In some vehicles the upper anchorage point in the rear vertical panel can only be installed in one way.
Please refer to vehicle owner’s handbook or a child restraint fitting station for correct method.
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS
THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE
UPPER ANCHORAGE POINT. BEFORE EACH USE OF THE RESTRAINT
ALWAYS ENSURE THAT THE ATTACHMENT CLIP IS CORRECTLY ENGAGED
TO THE UPPER ANCHORAGE POINT AND NOT HOOKED TO OR FITTED
TO, ANY OTHER OBJECT. THIS IS ESPECIALLY IMPORTANT IN VEHICLES
SUCH AS STATION WAGONS, VANS, HATCH BACKS OR VEHICLES WITHOUT
A FIXED PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT
VISIBLE.
IMPORTANT:
