Instructions for Installation & Use
34
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
HOW TO INSTALL CHILD HARNESS
USING LAP ONLY SEAT BELT OR CONVERTED LAP-SASH
SEATBELT WITH THE CHILD HARNESS
Install the Child Harness to the booster seat and anchorages as detailed previously (page
28- 29). Install the booster seat into the vehicle. Ensure the top tether strap is attached to
the vehicle upper anchorage and adjusted correctly. With the vehicle seatbelt converted (if
necessary) ready for use, thread the lap seatbelt through the Child Harness strap loops as
shown.
NOTE: Seatbelt extenders should not be used
if the seatbelt is not long enough to fit around
the child. If a seatbelt extender is used then
the seatbelt buckle must not be in contact with
the child.
Use the child harness as detailed on page
26 - 27.
The shoulder straps must be in the slots
which are nearest to the child's shoulders, the
headrest should be adjusted to suit the child,
but shoulder straps must not be lower than the
child's shoulders.
Always adjust height of headrest and shoulder
straps as child grows.
SecureGuard™
Device
Child Harness
strap loops
:
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
Lap belt
