Instructions for Installation & Use
22
HOW TO USE
USING WITH A LAP-SASH SEATBELT
A. With the Booster Seat installed in the
vehicle as described on the previous
page, check the backrest touches the car
seatback and the upper anchorage strap
is connected.
Sit your child on the seat. Ensure the
headrest is set to the correct height for
your child (See page 17).
Lap part
of seat
belt in
recess
area.
B. Position the lap-sash belt over the
child following the red
BOOSTER
SEATBELT PATH
labels. Engage
seatbelt tongue into buckle, ensure there
are no twists in the belt. If the seatbelt
buckle is adjustable, adjust the buckle as
low as possible away from the child.
Remove any excess slack in the lap belt.
A
IMPORTANT:
ALWAYS USE THIS SASH GUIDE
Red
BOOSTER
SEATBELT
PATH
label
on each side
Red
BOOSTER SEATBELT
PATH
label on each side
CHILD USE
(BOOSTER SE
AT
MODE)
Sash guide
C. Fit the sash portion of the belt through the
sash guide on the headrest as shown.
Engage buckle
