Instructions for Installation & Use
19
HOW TO SETUP
ADJUSTING THE SECUREGUARD™ DEVICE
The SecureGuard™ Device crotch strap must be
adjusted so that it fits the seatbelt correctly to the
child. The crotch strap length adjuster can be found
under the seat. The seat base trim will need to be
removed to aid adjustment.
A. Underneath the base the length of the crotch
strap can be adjusted by threading webbing
through the adjuster in the direction of the arrows
shown below.
B. Adjust the crotch straps of the SecureGuard™
Device so that the Lap portion of the seatbelt
is positioned as low as possible on the child's
hips and thighs and the lap belt is prevented
from rising up the abdomen. Ensure the
SecureGuard™ Device does not push into your
child's thighs as this may cause discomfort.
Adjust the crotch strap to a shorter length when
using the seat with a smaller child.
TO SHORTEN
TO LENGTHEN
Bottom edge of
SecureGuard™
Device level
with top of legs
(with all slack
removed from
crotch straps).
SecureGuard™ position
TOO HIGH
SecureGuard™ position
OK
The SecureGuard™ Device
must always be setup to position the lap belt correctly on
the child's hips and thighs. The occupant may be injured in an vehicle crash if the
SecureGuard™ Device is set too high. DO NOT attempt to remove or dismantle the crotch
strap and SecureGuard™ Device.
CAUTION:
ALWAYS USE THE SECUREGUARD™ DEVICE
Under booster seat
Adjuster
CHILD USE
(BOOSTER SE
AT
MODE)
