80
Instructions for Installation & Use
CARE & MAINTENANCE
TO REMOVE COVER
You do not have to completely remove the shoulder harness assembly from the restraint. However, you will
need to disconnect the shoulder harness straps from the metal strap connector at the back of the restraint.
Follow the sequence below A to G to remove the cover.
A. Disengage harness tongues from harness buckle.
B. Disconnect shoulder harness straps from metal strap connector at the rear (page 43 or page 66). Pull
the shoulder straps out of the shoulder strap slots in the headrest. Remove any accessories such as
padded insert, shoulder pads and crotch pad (if supplied).
C. To remove headrest cover, unclip any press studs fitted to the headrest and then remove headrest
cover by lifting the elastic loops attached to the headrest cover and peeling away from headrest.
D. To remove trim cover, unhook elastic loops at the upper rear of the seat and clips and/or elastic loops at
the front of the seat.
E. Release fabric overhang at the side of the seat.
F. Carefully remove trim cover away from restraint while feeding through the crotch buckle, harness
tongues and strap through the lap and crotch strap slots in the cover.
B
B
C
D
E
F
D
