63
Instructions for Installation & Use
E. Place the restraint in the desired location on the
vehicle seat between the two ISOFIX low anchorages.
F. Ensure the child seat is against the vehicle seat back
as shown. Engage each ISOFLEX connector onto
each ISOFIX lower anchorage. A green indicator will
show on the top of the ISOFLEX connector when it
has engaged. Pull the adjusting strap to remove most
of the slack on each side.
G. Push downwards on of the seat to compress it into
the vehicle seat. Whilst pushing, pull on adjuster strap
to remove all slack and tighten the ISOFLEX strap.
Repeat for the other adjuster strap.
H. Each tension indicators must show 'green' indicating
minimum tension has been applied.
Always remove slack from ISOFLEX Straps.
A loose installation is dangerous.
HOW TO INST
ALL USING ISOFLEX CONNECTORS
Push down
IMPORTANT:
Do not attach the lower attachment connectors of two separate child restraints to the same ISOFIX
low anchorages in your car.
Always attach the top tether strap to the child restraint upper anchorage in your car.
Child restraint lower attachment connectors and the ISOFIX low anchorages in your car are designed to
withstand only those loads imposed by a correctly fitted child restraint.
Pull ISOFLEX adjuster strap to tighten
Tension indicator
