Instructions for Installation & Use
25
HOW TO INSTALL - TOP TETHER STRAP
B. Feed the Top tether strap through the
inside of the handle, around the front of the
Capsule and through the Top Tether Strap
guides in the front of the Baby Capsule.
C. Adjust the top tether strap by pulling as shown
in Fig. 1 to remove all slack in the straps. Do not
over tighten.
Top tether strap
D. Roll up excess strap and place into the storage
pocket attached to the top tether.
Once the Capsule is fitted to the base, refer to
page 32.
A. Lengthen the strap fully by pressing the
adjuster button (1) and pull the strap (2)
so that the strap is ready to attach to the
Capsule.
THIS TOP TETHER STRAP MUST ALWAYS
BE FITTED WHEN THE BABY CAPSULE IS
USED IN THE CAR.
TOP TETHER
REARWARD FACING
Top Tether Strap guides
Top tether strap
Top tether strap
placed in storage
pocket
Attachment Clip
Car's Upper
Anchorage Fitting
FIG.1.
1
2
