Instructions for Installation & Use - Series No. 8300/A/2013
Instructions for Installation & Use - Series No. 8300/A/2013
36
37
ACCESSORIES & FEATURES
ACCESSORIES & FEATURES
Place ribbed or pocket end of the
Messy Mat seat protector on edge
of car seat, smooth back toward
seat join (’A’) and fit in any excess
Messy Mat into the join of the car
seat (’A’).
Short Messy Mat™
Pockets
(where
fitted)
Ribs
'A'
Long Messy Mat™
Pockets
(where
fitted)
Ribs
'A'
MESSY MAT™ SEAT PROTECTOR INSTRUCTIONS (IF SUPPLIED)
CUP HOLDERS (IF FITTED)
The seat has a cup holder on either side of the seat. Swing the cup
holder out from the seat to use. Ensure the cup holder and its contents
can not be crushed by the car door. Fold away when not in use.
Cup Holder
CAUTION:
The pocket is only for small, light items. DO
NOT overload the pocket with heavy, bulky
items as this may damage the pocket or
cause passengers to trip over them.
Only use cup holders for holding cups, bottles and drink cartons. Do not use for hot drinks.
IMPORTANT:
COVER (STYLE MAY VARY)
The cover has been designed to protect your child when
seated in the restraint. Care should be taken if children
either eat or drink while in the restraint as some food or drink
products may cause damage or marking to the cover.
ARMREST (IF FITTED)
The armrest can be raised to make it easier to place the child in the seat
and can be in the down position when the child is seated and secured.
Armrests
EZ BUCKLE SYSTEM (WHERE FITTED)
EZ Buckle system retains the harness buckle in a forward position and
prevents the child from sitting on the buckle when boarding. Aids in
opening harness and placing child in the seat.
A. Feed EZ Buckle system though slot in front of crotch buckle slot
B. Feed Crotch buckle through slot in EZ Buckle system as shown.
Ensure that the EZ Buckle system is behind the buckle- i.e.
the buckle is in front.
B
A
A
