Instructions for Installation & Use - Series No. 8300/A/2013
Instructions for Installation & Use - Series No. 8300/A/2013
18
19
INSTALLING INTO VEHICLE
(FORWARD FACING) (UPRIGHT OR RECLINED)
A. Determine whether an upright or reclined installation is
preferred as shown right.
B. To move the recline foot from upright to reclined mode
or vice versa, pull the foot outwards to unlock it, then
rotate the foot. Push to lock in place. See 3 steps
below.
Reclined
Upright
Pull out
Rotate
Push in
to lock
If the car seatbelt does not remain firm in everyday use, then contact
the retailer, or Britax Safe-n-Sound customer service for a gated
3-bar slide (order No. 0215).
Ensure that the child restraint is not over reclined. The backrest
should not be reclined more then 45°.
NOTE:
Some car seats have more rearward slope than others. Use
a rolled up towel or padding under the seat for contoured vehicle seats
to prevent excessive recline.
Rolled up
towel or
padding
1
2
3
HOW TO INSTALL
HOW TO INSTALL
4 Slots
When replacing cover, ensure none of the harness straps are twisted and that all straps are
secure by pulling each harness strap.
IMPORTANT :
3. Longest Length
for larger child.
2. Mid Length
for mid size Child
1. Shortest Length
for smaller child
B
Anchor
plate
ADJUSTING THE CROTCH BUCKLE HEIGHT
Crotch buckle height adjustment is changed by threading the
anchor plates into the respective slot as shown to anchor
different buckle heights. The centre of the buckle should be
positioned approximately in line with the thighs. The seat has the
crotch straps fitted in the lowest position when supplied.
A. Lift trim cover to reveal crotch strap slot.
B. Turn the crotch anchor plate and push through the slot as
shown until the crotch strap assembly is free from the seat.
C. Insert crotch strap anchor through restraint slot which will
position crotch strap level with the child’s crotch and feed
through other slot as shown.
Use Position 1 for smaller children and Position 2 and 3 for larger
children.
Anchor plate
Slot
Child
legs
