manualshive.com logo in svg

Britax MAXI GUARDSICT8300 A 2013 series, Instructions For Installation & Use

Share
Download
Britax MAXI GUARDSICT8300 A 2013 series Instructions For Installation & Use Download Page 13

Instructions for Installation & Use - Series No. 8300/A/2013

Instructions for Installation & Use - Series No. 8300/A/2013

Pull to 
lengthen

Press 
and hold 
or lift

24

25

HOW TO USE

ADJUSTING AHR EASY ADJUST™ HEADREST AND HARNESS STRAP 

HEIGHT 

A. You do not need to remove the restraint from the 

vehicle to adjust the harness or headrest positions. 

     Small adjustments maybe done with the child in the 

seat. The child will need to lean forward to allow the 
headrest to be adjusted.

     To adjust the headrest; lengthen the harness, lift 

the AHR Easy Adjust Headrest Lever at the top of 
the headrest then pull up or push down so that the 
shoulder strap slots are level with or slightly above 
your child’s shoulders. If the headrest is just above 
the shoulders then the harness level will be correct.

B. To lengthen harness press harness adjustment 

button or lift lever while pulling on both shoulder 
straps evenly until the harness will accommodate 
the child. Place tongues in harness tongue holders 
(if fitted).

AHR Easy Adjust Headrest lever

HOW TO USE

B

Harness Tongue 
Holders (if fitted)

NOTE: 

If child’s shoulders touch the headrest side 

wings, raise the headrest to the next headrest position.

NOTE:

 

This child restraint does not require the straps 

to be disconnected to adjust their height, only the 
headrest needs to be moved to adjust the shoulder 
strap positions.

 

ADJUSTING SHOULDER HARNESS STRAP HEIGHT

Correct fitment of the harness is very important as it restrains the 
child in the restraint. The harness must fit firmly around the upper 
torso of the child and be positioned so as to leave the child’s arms 
and legs free. Adjust the headrest so that the sides of the headrest 
are just above the shoulders. See the next page.

  1.   Harness shoulder slots in headrest
  2.   AHR Easy Adjust Headrest lever
  3.   Shoulder harness straps
  4.   Harness tongues & buckle
  5.   Lap strap slots
  6.   Crotch strap slots
  7.   Harness adjustment strap
  8.   Shoulder Height Markers

The shoulder straps must be in the slots which are nearest 
to the child’s shoulders, but not more than 25mm below the 
child's shoulders. With this headrest design the shoulder 
strap slot will usually be just above the shoulders.

25MM

1

2

3

3

5

5

4

6

7

8

6

Summary of Contents for MAXI GUARDSICT8300 A 2013 series
























Reviews:

No comments

Brands by name

Popular brands

Load more brands