Installation
11
Vehicle SSeating PPositions
10
WARNING:
•
Forward facing vehicle seats MUST be used with this child
restraint. Side facing or rear facing seats in vans, station wagons
or trucks CANNOT be used.
•
Britax and the U.S. Department of Transportation warn that chil-
dren 12 and under must ride in the rear seats, away from front
air bags. The only exception is if the air bag is off.
IInnssttaallllaattiioonn w
wiitthh LLA
ATTC
CH
H
1
Verify that your vehicle is
equipped with LATCH anchors (
Fig
A
). If LATCH anchors are not
installed, use Seat Belt Installation
methods on pages 13—15.
2
Pull green handle to extend
LATCH connectors (
Fig B
).
3
If protective cover is in place,
squeeze LATCH release button on
each connector to release cover,
then remove (
Fig C
).
NOTE:
Store protective cover for
future use. Protective cover should
be in place when LATCH is not in
use.
4
Place the child restraint forward
facing on the vehicle seat.
LATCH Anchors
A
B
C
P2170_EXP_R01.qxd 5/21/2007 9:30 AM Page 12
