![Britax Expressway ISOFIX User Manual Download Page 13](http://html.mh-extra.com/html/britax/expressway-isofix/expressway-isofix_user-manual_2813983013.webp)
23
22
Adjusting H
Harness H
Height
Checking H
Harness H
Height
H
Haarrnneessss H
Heeiigghhtt A
Addjjuussttm
meenntt
1
Loosen the harness by pushing the har-
ness release button while pulling the
shoulder straps forward as far as possible
(
Fig. A
).
2
From the rear of the child restraint,
unhook the shoulder harness from the
yoke (
Fig. B
).
3
Pull straps through the shell and cover,
to the front of the restraint.
4
Thread the harness straps through the
appropriate harness height slots (
Fig. C
).
5
Reattach harness straps to the yoke
(
Fig. B
).
6
Pull harness adjuster strap to tighten
the harness.
7
Verify that all straps are threaded at the
same height and are not twisted.
TToo C
Chheecckk H
Haarrnneessss H
Heeiigghhtt::
1
Place child in restraint, then secure harness
(
see pages
20—21
).
2
Observe where the shoulder harness is
positioned on your child.
•
Forward FFacing SStrap H
Height:
Harness
Straps should be located in the nearest
slot at or above the child’s shoulder.
3
If harness height is okay, continue using
child restraint without adjustment. If harness height requires adjust-
ment, refer to
Adjusting Harness Height
on page 23.
NOTE:
Once the top slots become necessary, your child may contin-
ue to use the restraint until the center of the ears become level with
the top of the restraint shell, or weight exceeds 40 pounds (18 kg).
Forward Facing
Strap Height
A
B
C
P2170_EXP_R01.qxd 5/21/2007 9:31 AM Page 24