manualshive.com logo in svg

Britax CONVERTIBLE CHILDRESTRAINT, Instruction Book

Share
Download
Britax CONVERTIBLE CHILDRESTRAINT Instruction Book Download Page 47

47

HOW TO USE

PLACING CHILD INTO RESTRAINT

Buckle tongue holder 
on both sides of the 
seat. Push tongue 
inwards to engage.

Pull Straps

D. Fit either harness tongue into the harness buckle followed by the other tongue. A click is heard when the 

last tongue is fully engaged.  
Should the second tongue not engage - press the red button and reinsert the tongues. Ensure secure 
engagement by pulling harness straps. If the harness buckle does not engage correctly then it may require 
cleaning or seek replacement - refer to page 55. 

The buckle tongues are fully engaged when both 

tongues are inserted and 'click' is heard.

A. Check that the harness shoulder straps are in the 

correct position. Refer to page 65 for correct shoulder 
harness strap height and for setting up the harness.

B. Lengthen harness by pressing harness adjuster 

button  or  lever.  Pull  out  the  desired  amount  of  slack.                             
Press the harness buckle button to release tongues. 
Store the tongues in the buckle tongue holders while 
placing child in the restraint.

C.  Place child in the restraint and feed each arm through 

shoulder straps. Place harness buckle between child’s 
legs.

Press Harness adjuster 
button or lever

Pull to remove slack from 

harness lap straps

Click

Tongue

Buckle

TODDLER USE FORWARD FACING

Summary of Contents for CONVERTIBLE CHILDRESTRAINT





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands