manualshive.com logo in svg

Britax CONVERTIBLE CHILDRESTRAINT, Instruction Book

Share
Download
Britax CONVERTIBLE CHILDRESTRAINT Instruction Book Download Page 41

41

HOW TO SET-UP

TODDLER USE FORWARD FACING

PREPARING FOR INSTALLING INTO VEHICLE - FORWARD FACING 

Fully press Adjuster Button (A) while 
pulling Upper Anchorage Strap (B) 
to lengthen.

B

A

The restraint is normally packaged in the fully upright forward 

facing mode. If you need to use it rearward facing you must first 

fully recline the restraint, and convert to rearward facing mode 
as shown below.
If upper anchorage strap is folded up for storage undo storage 
strap then lengthen. Fully press adjuster button (A) while pulling 
upper anchorage strap (B) to lengthen.  

INSTALLING INTO VEHICLE - FORWARD FACING

DO NOT USE RESTRAINT IN FORWARD-FACING POSITION WITH THE 

STABILISING BAR DEPLOYED. 

Do not recline into rearward facing position when using restraint in forward 

facing mode.

Ensure harness are in the correct position (Refer to page 45).

If changing from rearward facing to forward facing:

A.  Remove the seat from the vehicle by disengaging the 

seatbelt as described on pages 49 and 50.

B.  Remove any insert pads (if fitted) as they are no longer 

required. 

C.  Rotate the stabilising bar to the required forward facing 

position shown on page 55.

IMPORTANT: 

Summary of Contents for CONVERTIBLE CHILDRESTRAINT





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands