manualshive.com logo in svg

Britax CONVERTIBLE CHILDRESTRAINT, Instruction Book

Share
Download
Britax CONVERTIBLE CHILDRESTRAINT Instruction Book Download Page 24

24

HOW TO INSTALL

      

 CAUTION: 

CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP TETHER 

STRAP DAMAGED BY UNSECURED CARGO IN A COLLISION. 

SECURE OR REMOVE HAZARDOUS CARGO BEFORE USING THIS 

CHILD RESTRAINT.

H.  Tighten top tether strap by pulling adjustment 

strap to remove slack, leave the strap slack on 
the side the baby will be placed into the seat from. 
Any slack will be removed once the baby has been 
harnessed into the seat.

I.   Remove the slack from the adjustable top tether 

strap by pulling adjustment strap (3), After the 

baby is fitted in to the harness, remove all slack in 

the top tether strap and roll up excess strap and 
place in the pocket provided.

     Do not tighten the top tether strap such that the 

restraint is lifted up. Remove slack only.

Pull Adjustment Strap 
to remove slack

Fully press Adjuster Button (1) while pulling 
Upper Anchorage Strap (2) to lengthen.

1

2

3

Roll up excess strap and 
store in the pocket attached 
to the cover.

BABY USE REARWARD FACING

Summary of Contents for CONVERTIBLE CHILDRESTRAINT





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands