38
7
Adjust the infant carrier
handle to any locked position.
8
Verify that all connections are
secure. Check that:
9
The vehicle belt is not twisted.
9
The vehicle belt is tight and locked.
* Check that the vehicle belt retractor is locked or,
* Check that the latch plate is locked or,
* Ensure that a locking clip has been properly installed.
9
The infant carrier handle is rotated into any locked position.
9
The infant carrier is secure.
* If the infant carrier can be moved more than 1 in. (2.5 cm) front-to-back
or side-to-side at the vehicle belt path, repeat installation or choose
another seating location.
9
Check the recline angle.
10
The proper recline angle
is achieved when the level
indicators on the infant carrier
are within the level lines.
* The vehicle should be parked
on a level surface.
NOTE:
It may be necessary to install the infant carrier more than once to
achieve the proper recline angle.
Installing Your Infant Carrier without Base
Summary of Contents for CHAPERONE
Page 1: ...PLEASE READ INSTRUCTIONS STORE UNDER COVER Chaperone User Guide ...
Page 2: ......
Page 75: ...73 ...
