Britax B-Mobile Stroller, User Manual

Page: 11 / 28

16 17
Securing Your Child
1. Release the harness by depressing the
button in the center of the buckle while
pulling the two tongues away from the
buckle assembly.
2. Fasten the harness by inserting the
tongues on the harness straps into the
buckle assembly.
3. Tighten or loosen the harness straps by
sliding the harness adjusters.
Infant Car Seat Mode
• Only use Britax infant car seats with this stroller.
• Do not exceed the manufacturer’s maximum weight limit
when using an infant car seat with this product. See Britax
infant car seat user guide for maximum occupant weight
and other instructions.
• All infant car seats MUST be installed rear facing.
Using the Infant Car Seat Receivers
Attaching the Infant Car Seat Receivers
NOTE: Receivers and stroller are marked left (L) and right (R). Attach
each from the position of the stroller occupant.
1. Lock the parking brake.
2. Remove arm bar. Pull armbar release
button on each side of armbar forward
and lift armbar out of receivers.
3. Align the receivers with the mounts on
the inside frame of the stroller, then
push down until a click is heard. Pull
up on the receivers to ensure they are
secure.
CLICK