Britax Advocate 65-G3, User Manual

Page: 8 / 45

12 13
Child Seat Functions Child Seat Functions
Adjusting the Harness Height
1
Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
NOTE: In rear-facing mode, always position the harness straps at
or below your child’s shoulders. See page 5.
In forward-facing mode, always position the harness straps at or
above your child’s shoulders. See page 5.
1 Unbuckle the harness. Remove
the belly pad and buckle. See
page 38, steps 1a - 1d.
IMPORTANT:
• ALWAYS position the buckle in the
inner slot for rear-facing use when
using a vehicle seat belt installation.
• The vehicle belt must pass in front of
the buckle strap for rear-facing use.
• Position the buckle in the slot closest
to but not under the child for rear-facing use when using the
LUAS installation.
• NEVER leave the buckle in the adjustment slot.
• Use the outer buckle slot when installing the child seat forward-
facing with a child weighing 13.6 kg (30 lbs) and above or if the
buckle is under the child in the inner position.
ADJUSTMENT
SLOT
Adjusting the Buckle Position
2 Route the belly pad and buckle
through the desired slot in the
cover.
* Slide the end of the belly pad
under the comfort foam.
3
Slide the buckle retainer into
the front buckle slot and slide
into the corresponding buckle
position. Ensure the red release
button faces out. Replace
cover.
2
Squeeze the harness height
adjuster, slide the harness
into the desired position and
release.
* Ensure the harness has locked
into position.
1b
1a