9
Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
Installation - Wall Outlet
Choose the location for the wall
outlet and create a
25-30mm hole in the wall.
Ensure your shower accessories
have enough reach from that
position.
Screw the wall outlet into
the 1/2” female connection,
using a suitable thread sealant
ensuring the rubber seal is fitted
to the back of the wall outlet.
Fitting a 1/2” female
connection at the hole
in the wall
(not supplied).
Installation - Interface Unit
Install the outlet
Install the outlet
and
and
finish the wall
finish the wall
surface. Once
surface. Once
finished,
finished,
silicone around
silicone around
the Interface unit.
the Interface unit.
2
1
Install suitable batons
Install suitable batons
(if required) into the
(if required) into the
cavity. Punch out section in
cavity. Punch out section in
top left for the cable.
top left for the cable.
Thread interface cable
Thread interface cable
through hole & plug into
through hole & plug into
Interface unit.
Interface unit.
Interface unit
can be fix
ed
between tiles
& siliconed
into plac
e
4
3
Mark the position of the
Mark the position of the
mounting box; drill, plug
mounting box; drill, plug
hole to suit & fix
hole to suit & fix
using suitable screws.
using suitable screws.
(Not supplied)
(Not supplied)
Fix the Interface unit
Fix the Interface unit
to the mounting box
to the mounting box
by tightening grub
by tightening grub
screws with 1.2mm
screws with 1.2mm
hex key.
hex key.
