8
Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
Installation - Bath Shower Mixer
Pack Contents
1. Identify all components are present prior
to starting installation.
2. Position the ‘O’ rings in the grooves on the
underside of the tap body and feed the
body through the tap holes on the bath.
3. Using a suitable spanner, secure the tap
to the bath with the washers and metal
backnuts.
4. Connect the hot and cold
water supplies to the tap tails.
We recommned fitting
isolation valves for ease of
future maintenance (not supplied).
5. Connect the hose and handset to
the tap body.
REMEMBER
Hot on the
left, cold o
n
the right!
Operation
x2
x2
x2
x1
x1
x1
x1
6. Turn on the water supplies and the tap
letting the water flow for a few minutes
to check all joints and connections for
any leaks.
7. Position where you want the wall bracket to
be installed, ensuring the hose and handset
can reach. Mark and drill the fixing holes.
8. Secure the wall bracket using the
fixings supplied. Put the bracket cover
back on the fixing plate.
Cold
Hot
On
On
Pull up to switch to
shower mode.
Push back down to
go back to bath fill.