All products manufactured and supplied by Bristan are safe to use
provided that they are installed, operated and receive regular maintenance
in accordance with these instructions.
This product has been tested to the TMV3 scheme for use in Healthcare and
Commercial situations and performs to the requirements of NHS Specification
D08. It also satisfies the requirements of the Water Supply (Water Fittings)
Regulations 1999 and current by-laws. For full Installation Requirements &
Notes (IRN) please visit
wras.co.uk/directory
.
To ensure the product is installed in compliance to the TMV3 and D08
standards, please refer to the TMV Manual provided separately with this
product.
Failure to do so may mean that the tap is no longer compliant.
Isolation valves must be fitted to the inlet water supplies to ensure ease of
future maintenance. Before installing this product the water supply must be
thoroughly flushed in order to remove any swarf, solder etc. Full access must
be made available for future maintenance/servicing purposes.
Before drilling into walls, check that there are no hidden electrical wires,
cables or water supply pipes. This can be checked with the aid of an
electronic detector.
If power tools are used do not forget to:
- Wear eye protection
- Unplug equipment after use
This product must not be modified in any way as this will invalidate
the guarantee.
If you are in any doubt about your ability to install this product safely you
must employ the services of an experienced qualified plumber.
If in doubt,
contact a registered plumber, your Local Water Authority or the Secretary of
the Institute of Plumbing, address as follows:-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB, Tel: 01708 472791
Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
3
Important Safety Information
