Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
7
Installation
1.
Mark the position
Position the assembled riser rail
onto the wall, bearing in mind
the highest maximum position
required for the handset. With the
riser rail vertical, mark the position
of the wall brackets onto the wall
surface.
2.
Attach wall bracket fixings
Remove the wall brackets from
the rail and then remove the
fixings from the wall brackets.
Position the fixing bracket in the
marked positions against the wall,
ensure they are vertically in line
with each other and mark the
centres of the fixing holes onto
the wall.
Warning:
Please check
for any hidden pipes and
cables before drilling holes
in the wall.
Drill suitable holes and insert the
wall plugs. Securely attach the
fixing brackets to the wall using
the screws.
Tip:
A piece of
insulation or
masking tape
positioned where
holes are to be
drilled and before
marking out the
exact position for
the fixing holes will
help stop the drill
bit from wandering,
particularly on a
tiled surface.
When working near
a basin, bath or
shower insert plug
or cover waste
to prevent losing
small parts. Take
care not to drop
tools / equipment
into basin, bath
or shower during
installation.
