Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
Installation
3.
Insert riser rail
Ensure the rail clamps are in position
and push the riser rail up through
the bottom wall bracket.
Push the shelf and slider down onto
the riser. Ensure the slider it is the
correct way up, as shown opposite.
Push the riser rail up through the
top wall bracket.
4.
Tighten rail clamps
Centre the riser rail within the wall
brackets and tighten both clamps
located inside the wall bracket onto
the rail.
5.
Fit the riser to the wall
Slide the riser brackets over the
bracket fixings attached to the wall.
Tighten the grub screw on
the underside of both top and
bottom wall brackets using a
2.5mm hexagonal key.
Rail
Clamps
Component Order
Bottom Bracket
Shelf then Slider
Top Bracket
Fit to Wall
8
