Basin Mixer, Eco Basin Mixer
Basin Mixer, Eco Basin Mixer
Basin Mixer, Eco Basin Mixer
Basin Mixer, Eco Basin Mixer
1. Identify all components are present prior to installation.
2. Install the mixer (7) to the basin. Secure the mixer to the surface of basin using the fixing kit
(10) with plinth washer (9) and plinth (8) above the basin.
3. Screw in flexible connecting pipes (11) to the mixer by HAND ONLY (DO NOT OVERTIGHTEN),
and then connect hot and cold water supplies.
4. Fit the pop-up waste (12), with the flat washer below and the shaped washer above the basin.
It is advised that a silicon sealant be applied to both sealing faces of the washers. The plug
height can be set by adjusting the waste rod operating rod, rod connector and then screw in
the base of the plug. Friction for the waste mechanism can be adjusted using the waste
cap.(DO NOT OVERTIGHTEN).
5. Turn on both water supplies. Lift and turn the handle both ways for a few minutes, letting the
water flow, to check all joints and connections for leaks.
5. Installation cont
5. Installation cont
5. Installation cont
5. Installation cont
....
10
11
1
2
3
4
5
6
7
8
9
12
NOTE: CAP EBAS C has a
click position to encourage
the use of less water. For
increased flow, the Eco Click
feature can be overridden.
07
