Basin Taps & Bath Taps
Basin Taps & Bath Taps
Basin Taps & Bath Taps
Basin Taps & Bath Taps
1. Identify all components are present prior to installation.
2. Install the taps (5) to the basin/bath. The backnut (1)
and backnut washer (2) are used under the basin/bath to
secure the taps to the surfaces of basin/bath with the
washer (3) and the plinth (4) above.
3. Connect the hot and cold water supplies.
4. Turn on the water supplies. Open both taps, letting the water
flow for a few minutes to check all joints and connections for
leaks.
Note:
Note:
Note:
Note: Bath taps operate at a minimum pressure of 0.3 bar
(3 metre head).
Basin Mixer
Basin Mixer
Basin Mixer
Basin Mixer----without waste
without waste
without waste
without waste
1. Identify all components are present prior to installation.
2. Install the mixer (7) to the basin. Secure the mixer to the surface of basin using the fixing
kit (10) with plinth washer (9) and plinth (8) above the basin.
3. Screw in flexible connecting pipes (11) to the mixer by HAND ONLY (DO NOT
OVERTIGHTEN), and then connect hot and cold water supplies.
4. Turn on both water supplies. Lift and turn the handle both ways for a few minutes, letting
the water flow, to check all joints and connections for leaks.
1
2
3
4
5
6
7
8
9
10
5. Installation
5. Installation
5. Installation
5. Installation
10
11
1
2
3
4
5
6
7
8
9
06
