TLC40+50 Eco_v01_GB_NL
6
4.6
Place the white evaporating block upright in the clear water pan. Open the door and lift the pan into
position, it pushes up and across into two slots on the heater enclosure. The pad may need to be softened
with a little water to help it flatten while the pan is fitted. The pan is located in this manner to help
prevent accidental removal by animals.
4.7
Your brooder is supplied with air filter media fitted at the air inlet (see fig 1) and at each end of the heater
enclosure (see picture 9 above). For details of filter replacement see the Servicing section.
4.8
Place the brooder on a scratch and moisture resistant surface. Worktop height is ideal.
4.9
Connect the mains cable to the inlet. Ensure the connector is pushed fully home in its socket.
4.10
The fan will start and the display will show the current temperature inside the brooder.
4.11
Allow the brooder to run for at least an hour to stabilise the temperature before making adjustments or
introducing animals.
8
9
Air Filter
