1019099-F
9
English Manual
================================================================================================
x11
25
7
25
ASSEMBLY
WEARING
GLOVES:
Position the eleven
Tines (
7
) and twenty-two
Spacer/Bearing Tubes (
25
)
on the Axle Assembly (
6
)
as follows:
• Bearing,
Small End First
(
25
)
• Aerator Tine (
7
)
• Bearing,
Large End First
(
25
)
CAUTION:
GLOVES ARE REqUIRED WHEN
HANDLING AERATOR TINES. Tines have extremely
sharp points. Use caution when handling.
Step 3-B
NOTE: The Bearings (
25
) have two small openings
and extensions. These are designed to sandwich the
Tines (
7
), sliding through and connecting.
Place a 5/8” Thick, Flat Washer (
16
)
on the Axle Assembly (
6
).
Slide the Axle (
6
) through the hole in the
End Panel (
5
, right side
) and add another
Flat Washer Thick (
16
)
if needed
.
Step 3-A
16
16
6
5
6
