8
810-6570-F ROTISSERIE BURNER
CAUTION:
Only use specified natural gas
orifice for your grill.
Note:
It is helpful to keep the screws
with the components as they are
removed for ease of reassembly.
Step 12
Remove the three screws of panel from front
side of grill to gain access to the rotisserie
LP brass orifice on back side of grill. Set aside
for later use.
Step 13
Using an adjustable wrench to hold the gas
line secure, use the open end wrench provided
to loosen the gas line retaining nut. With the
rotisserie gas supply line detached from the
housing, use two wrenches to remove the
LP brass orifice from the gas supply line.
Replace the LP gas brass orifice with the
proper natural gas orifice. (1.35 mm RED)
Note:
Bending the hose could damage the
supply line.
Step 14
Reattach gas supply line to the rotisserie
housing by securing with the retaining nut
removed in Step 13.
Note:
Leave the back panel off until the
end of conversion and all gas leak
testing has been completed.
Step 15
Re-install rotisserie cover using the bolts that
were set aside in Step 12.
1.35 mm
Existing Rotisserie LP
Gas Orifice
Retaining Nut
Brass Orifice
Replacement Rotisserie
Natural Gas Orifice
(identified by number)
Rotisserie Burner 1.35 mm (RED)
Cover Bolts
