INSTALLATION STEPS
Step 1
Attach burner, air damper, spring and hose
by threading the burner onto the hose as
illustrated.
Step 2
Attach leg to cooker bottom ring frame first,
using one M6 x 8 mm bolt. Then, attach to
cooker body using two M6 x 8 mm bolts.
Repeat for other three legs.
Step 3
Attach the retaining bracket to the cooker
body using two M6 x 8 mm bolts. Remove
pre-attached wing nut from bracket, adjust
bracket to hold pot width, tighten bracket
using the wing nut. Repeat for other two
brackets.
Note: For 10, 24 and 30 quart pots install the
brackets as illustrated to the left. The 42,
60 and 80 quart pot, the brackets must be
turned 180˚ so that the vertical part of the
bracket is the furthest away from the rim.
Step 4
Remove the nut from the bottom of the
burner. Then set the burner on the mounting
strap inside the cooker stand, attach the
bottom heat shield below the strap and secure
with the nut.
Burner
15
Retaining Bracket
Wing Nut
Summary of Contents for 4010 series
Page 34: ...33 ...
