CJWinter Page 7
Package Contents
This tool is shipped complete with everything you need to knurl you parts
except the knurls themselves, which are application specific.
In the event you need a spare, each part (size permitting) is permanently
identified with laser-marked part # for easy identification, and replacement.
All part identification in this manual will refer to the BOM Balloon # on the
Assembly Drawing contained in this manual, and be noted as in parentheses
after the part name,
i.e.: Center Plate (#3).
Machine Mounting
The 192 Series tool is available with a standard 2.00" shank. Alternate shank
diameters are available on a custom order basis. Drill bushings can also be
used to adapt to larger tool holders.
Shanks are roughly 4" long, and have an additional 1" protrusion for the
coolant hook-up and backlash adjusting screw. Most CNC lathes have more
than adequate clearance behind the tool holder to accommodate the entire
length of this tool, and this tool can be extended out from shallow tool holders
if required. Each shank is equipped with a single, flat for the holder retaining
screws. Overall dimensional drawings are available from our sales department
to help determine if this tool fits your machine application.
192 Series tool shanks are also equipped with a 1/4-NPT port for thru-coolant
connections.
