Renovent HR Medium/Large 2nd edition Augustus 2007
1
Application
Chapter 1
An appliance from the updated Brink Renovent HR series is a
KHDWUHFRYHU\XQLWZLWKDQHI¿FLHQF\RIDQGHQHUJ\VDYLQJ
constant-volume fans. The new generation stands out for its:
VWHSOHVVO\DGMXVWDEOHDLUÀRZUDWHVWKURXJKDFRQWUROSDQHO
¿OWHULQGLFDWLRQRQWKHDSSOLDQFHDQGWKHSRVVLELOLW\IRU¿OWHU
LQGLFDWLRQRQWKHPXOWLSOHVZLWFK
• completely new frost protection system that ensures op-
timum performance of the appliance, even at very low at-
PRVSKHULFWHPSHUDWXUHV
OLPLWHGVRXQGSURGXFWLRQGXHWRSUHVVXUHÀXFWXDWLRQ
The appliance comes ready for use. All control equipment has
been mounted and checked in the factory.
On installation, the appliance must be connected to the air
ducts, the condensate discharge, the mains supply and the
multiple switch.
7KHLQVWDOOHUFDQFKDQJHWKHGHVLUHGDLUÀRZIRUHYHU\VHWWLQJ
with the aid of the control panel on the appliance. See Chapter
4 for a detailed description 4.
The possibilities of the Renovent HR can be extended using
the separately available option pcb that the installer can place
in the appliance. For a description of the possibilities of the op-
tion pcb, see section 4.6 and wiring diagram section 9.4.
This option pcb is described in more detail in the installation
instructions that come with the option pcb.
It is possible to connect a Brink preheater to the basic pcb of
the Renovent HR without having to install an option pcb (see
section 9.4).
Summary of Contents for Renovent HR Large
Page 1: ......
Page 19: ... To dwelling To atmosphere From dwelling From atmosphere ...