Brink Renovent HR Large, Installation Instruction, Page: 28 / 40

24 Renovent HR Medium/Large, 2nd edition Augustus 2007
Chapter 7 Fault
7.1 Trouble shooting
If the control system detects an error, this is shown on the dis-
play by means of a number, preceded by a letter F (Failure). If
DZD\VZLWFKZLWK¿OWHULQGLFDWLRQLVPRXQWHGWKH/('RQWKH
3-way switch will also start blinking.
The examples shown here is the error F9. WKLVPHDQVVRPH -
thing is wrong with the wiring to the atmospheric temperature
sensor or with the sensor itself.
The appliance remains in this error mode until the problem in
question has been solved. Then the appliance will reset itself
(auto reset) and the display will once more show operational
mode.
The table to section 7.3 gives an overview of the errors, pos-
sible causes and the actions to be undertaken.
7.2 Filter indication
If the display shows the message " FIL ” then this means the
¿OWHUVKDYHWREHFOHDQHG,IDPXOWLSOHVZLWFKZLWK¿OWHULQGLFD -
tion has been mounted (= option), then simultaneously with this
message on the display, the LED on the switch will light up.
$IWHUWKH¿OWHUVKDYHEHHQFOHDQHGRUUHSODFHGWKHNH\³ OK ”
PXVWEHSUHVVHGGXULQJVHFRQGWRUHVHWWKH¿OWHULQGLFDWLRQ
The text “ FIL ” will blink for a moment and then the display will
return to operational mode.
5596-0