Brillion TURFMAKER Junior SLP2041, Operator'S Manual

Page: 13 / 42

1P128
5. Adjust the pick up switch and bracket so
the center line of magnet wheel and pick
up switch are horizontally and vertically
aligned with a maximum 1/8” between mag-
net wheel and pick up switch. Now firmly
tighten all screws.
6. Attach the short pick up switch ground wire
to the small hole in the 6K447 bracket with
a #6-32 x 1/2” machine screw, removing
paint under the wire connector to assure a
good electrical ground connection.
7. Route the wire from the acre meter down the front of the seed box and
around the outsideof the end bracket to the pick up switch and connect
the mating plugs.
8. Securely fasten the wire to seed box and end bracket using the adhesive
mounting bases and wire ties to prevent wire from becoming entangled or
rubbing moving parts.
9. Program acre counter following the instructions on the next page.
Note: Alignment of pickup switch
and magnet wheel is critical.
Improper alignment will
cause the acre counter to
record acres erratically or
not at all.
Side View
Top View
3. Attach the pick up switch to the top of the
6K447 bracket with two #8-32 x 1 1/4”
machine screws, flat washers, lock wash-
ers, and nuts.
Do not tighten screws at this
time .
1/8”
Maximum
MAGNET WHEEL
PICK UP
SWITCH
MACHINE SCREW,
#8-32 X 1 1/4”
FLAT WASHER, #8
LOCK WASHER, #8
NUT, #8-32
HHCS, 5/16-18 X 1”
LOCK WASHER, 5/16
NUT, 5/16-18
4. Press the magnet wheel onto the idler
shaft until it is vertically centered with
pick up switch.
PICK UP
SWITCH
6K447PICK UP
SWITCH BRACKET
MACHINE SCREW,
#6-32 x 1/2”
NUT, #6-32
GROUND
WIRE
Assembly / Acre Meter Kit
806 Page 11