Brightlink BL-VWMW-H265-EXT-4K, Operation Manual

Page: 29 / 34

29
2). The current maximum support is 9×9 splicing
3). Edge shielding (screen width, screen height, display width and display height) can be set
separately for each group of spliced images.
Specific steps are as follows:
1) Open the CMP integrated management platform and enter the main interface of the functional
panel;
2) Select the "OSD switch" option, check the OSD switch and return to the main interface of the
functional panel;
3) Select the "Screen Splice" option to enter the big-screen splicing interface;
4) Select the required number of splicing boxes (1, 4, 16, 25, 36);
5) Select the RX device signal source required to be spliced first according to the IP address
displayed by OSD;
6) Open the TX device list in the monitoring point area, select the required TX device, and long
press the left mouse button to drag it into the splicing box;
7) Open the RX device list in the monitoring point area, select the required RX device, and long
press the left mouse button to drag it into the splicing box;
8) Large screen splicing operation is completed.
Note: if RX returns to normal one-to-many or many-to-many, that is, reentry into matrix
configuration can be restored, exit will prompt whether to save the view.
Operating Instruction