Brightlink BL-VWMW-H265-EXT-4K, Operation Manual

Page: 28 / 34

28
Specific steps are as follows:
1) open the CMP integrated management platform and enter the main interface of the functional
panel;
2) select the "OSD switch" option, check the OSD switch and return to the main interface of the
functional panel;
3) select the "Screen Divide" option to enter the large-screen divide interface;
4) set the required number of divide boxes (1, 4, 16, 25, 36);
5) select the RX device to be divided according to the IP address displayed by OSD;
6) open the RX device list in the monitoring point area (left side), select the required RX device,
and long press the left mouse button to drag it into the divide box;
7) open the TX device list in the monitoring point area, select the required TX device, and long
press the left mouse button to drag it into the divide box;
8) large screen divide operation is completed.
Note: if the RX returns to normal one-to-many or many-to-many, it can be restored by re-entering
the matrix configuration. Exit will prompt you to save the view.
6.7.3. Screen Splice:
A large screen splice consists of a single signal source splicing multiple sets of RX (TV) into a
single image.See the example image below
1)
. Under large screen splicing, the maximum resolution of each group of RX devices supports
4K30.
Operating Instruction