35
Operating Instruction
10.3 Format
Select Video Output that needs to be changed in Video Output, and the selected block
will turn blue. Click on the Format button to change Output resolution (it support single
select, multiple select or all select), and click on the resolution to set it successfully.
10.4 Video Offset
1). Represents the number of the selected display.
2). X-axis margin value display
3). X-axis margin value confirmed
4). Y-axis margin value display
5). Y-axis margin value confirmed
6). Restore default value
Offset function: adjust the Offset of X axis or Y axis in a single screen, the range is 0-300,
increasing by 2 each time;The default is 0 for both X and Y.
10.5 Store
There are eight scenario schemes,
Preset1~ Preset8
, which can save the current state and recall the scenario
scheme when it is used next time (the default 8 scenarios is shown in the figure).
Note: The default of the scene is the P2P mode. If you directly called, it is changed to the output 1 to the
input 1, the output 2 is input 2, and the output 3 to the input 3 and the output 4 to the input 4.