34
Operating Instruction
10.2 Switch setting
The Video interface is divided into:
1). Seamless matrix mode
2). Video wall mode
3). Mutli-viewer mode
The current state can be set through the Onekey2x2 butto
n
In the Video interface, one-to-one and one-to-many Video switching can be realized.
One-to-one Video switching: first click any Output in Video Output, then select signal
Source in the Source button and click the corresponding signal Source (Input1~Input4) to
complete the switching operation.
One-to-many Video: first press and hold the left mouse button in Video Output to select
multiple outputs, and then select the signal Source (Input1~Input4) in the Source button.
Click and complete the switching operation.
The Source button "In1~4" will show blue if there is a signal has connected in this input
port.
If it show the white,it means that there is no signal.