14
Operating Instruction
5
Click "OK" to enter the next submenu.
6
Press the “up and down” button to select the "CH0" to close or the "CH1" is open
7
Click the "OK" button to complete the setting.
You can choose the
Top
area (one of the output port’s) to display CH0 or CH1.
8). CHO
Operation steps:
1
In the main menu, select "Video" to press the "OK" .
2
Press “ up and down” button to select "Output1" (The fifth ALL option means that all outputs
are selected)
3
Click "OK" to enter the next submenu.
4
press the “up and down” button to select "CH0"
5
Click "OK" to enter the next submenu and there are two submenus of CH0: Crop,Zoom
6
Press the “up and down” button to select “Crop” to set Start x : 0, Start y : 0, End x :6000, End
y: 6000 (There are 61 subitems under each coordinate, minimum 0, maximum 6000, each value
interval 100, the defaults value of selected video:( the upper left corner
Start (0, 0)
, the lower right
corner
End (6000, 6000), midpoint (3000, 3000)
)
7
Click on the "OK"button to complete the setting.
8
Press the “up and down” button to select “Zoom” . There are four subitems under Zoom: Start x:
0, start y :0, End x:3000, End y:3000;
9
click on the "OK" button to complete the setting.