3.
Connect the Supply Black, Ground and White (L-G-N) wires from the junction box to the terminal
connection box of the cMe3 as shown below.
IMPORTANT: THERE ARE THREE (3) WIRES (SHOWN BELOW) FROM THE MAIN HOUSING CANOPY
THAT CONNECT TO THE PLUG-IN RECEPTACLE AND ARE ONLY USED FOR THE PLUG-IN POWER
SUPPLY INSTALLATION METHOD.
4.
Install the Main Housing Canopy to the Canopy Back Plate as shown above. Tuck the supply wires into the
junction box and align the four slotted holes on the Main Housing Canopy with the Canopy Back Plate
holes. Use Canopy Allen Wrench (E) and the four screws provided with the Main Housing Canopy to
secure to the Canopy Back Plate by turning clockwise until tight.
5.
Return power to the branch circuit at the service breaker panel and proceed to the section
Setting Up Your
cMe3 Remote
.
Black / Live
Ground
White / Neutral
Main Housing Canopy
Canopy Screws (4)
Terminal Connection Box
Only used for Plug-In
Power Supply Installation