Setting the DMX Address
DMX Troubleshooting Guide
Figure 8
1. Program DMX addresses by gently pressing in the adjustment buttons with
a pointed object such as a pen (Figure 8).
2. Use Channels 001 thru 512 to program the DMX addresses for the lighting
control console. Program the DMX address on the fixture to match the
desired channel at the lighting control console.
(Example: 001 = channel 1, 002 = channel 2, etc.)
3. A fixture can be programmed for individual control by setting the DMX
address exclusively to a single fixture. Multiple fixtures can be set to the
same DMX address to control a group of fixtures on a single channel at
the lighting control console.
n
o
i
t
u
l
o
S
e
s
u
a
C
e
l
b
i
s
s
o
P
m
e
l
b
o
r
P
No DMX signal on all
fixtures in DMX system.
1. Lighting control console power is
turned "OFF."
2. Cabling or connection problem
between lighting control console and first
fixture in DMX system.
1. Turn lighting control console power "ON."
2. Check connections at first fixture and lighting
control console or try another DMX cable.
No DMX signal on a single
fixture or group of fixtures
in the DMX system.
Cabling or connection problem with
jumper cable.
Check connection of jumper cable between
fixture with no signal and previous fixture in DMX
system or try another DMX jumper cable.
Fixture is turned "ON" and
cannot be dimmed at
lighting control console.
1. Fixture is set to "Emergency ON"
mode or "Manual Dimming" mode.
2. Cabling or connection problem and
fixture is remembering last setting.
1. Set DMX address at fixture to match desired
channel at the lighting control console.
2. Check cabling and connections in DMX
system.
Unusable DMX signal.
1. Cabling problem.
2. Start channel is set higher than number
of channels transmitted by lighting control
console.
1. Check the wiring in DMX cable plug ends.
The DMX + and DMX - wires may be crossed.
2. Set start channel lower to accommodate the
number of channels transmitted by the lighting
control console.
Fixture Status Indicator
DMX Signal Indicator
Channel Indicator
Adjustment
Buttons
12
Summary of Contents for BL.16
Page 15: ...Notes 15...
