Bright Technology cb958b, User Manual, Page: 9 / 28

6
Position the wheel balancer in the desired position for
use. It must be ensured the floor is
leveled and of solid construction. The wheel balancer is
designed for operation indoors and should
not be exposed to moisture or direct sunlight.
5. SAFETY PRECAUTIONS
5.1.1 Before operation, ensure you have read the
instruction manual and all warning labels. Not working
in accordance with the safety instructions should cause
serious injury or death to the operator or bystanders.
5.1.2 Keep hands removed and loose clothing and
jewelry and stand clear of all moving parts of the
machine when in use. Inspect the machine before use
for any damage. In the event of any damage, the
machine must not be used
5.1.3 In the event of the emergency, you should press
the ―STOP‖ button immediately. To prevent injury, it
must ensure the protective cover is fitted all time.
5.1.4 Before balancing, operators should check all the
tyres and wheels for possible defects. Do not balance
the tyres and wheels with fault.
5.1.5 Do not attempt to balance the wheel if it is to be
found to be defect in any way.
5.1.6 You should wear properly, such as glove, goggle
and working suit. You should not wear necktie, long hair
and loosen clothing. The operator should stand beside
the machine and the unauthorized person should be
kept away from the machine.
5.1.7Before balancing, you should ensure the mount of
the wheel is proper. Before you start rotating the wheel,
you should confirm the quick nut turn around the thread
shaft for less than 4turns and is firmly fixed on the main
shaft.
GENERAL CONDITIONS OF USE
The wheel balancers described in this manual must be
used exclusively to measure the extent and position of
car wheel unbalances, within the limits
specified in the technical data section. Furthermore,
models equipped with motors must be
provided with a suitable guard.
Any use other than those described in this manual is to
be considered improper and unreasonable.
Do not start the machine without the wheel locking
equipment.
Protective
cover plays the role of prevention and safety.
。
Do not
clean or wash the wheels mounted on the machine with
compressed air or jets of water.
Get to know your machine. The best way to prevent
accidents and obtain top performance from the
machine is to ensure that all operators know how the
machine works.