©Copyright
EN-V2016
The information in this document is subject to change without notice
31
8
Terms and Conditions
8.1
Copyright
This User Manual contains information secured by copyright. All rights are reserved to Bright Blue, Lda.
This User Manual has been written for personal use. The copy, reproduction or translation of the present document, as a whole or
partially, requires prior written consent from Bright Blue, Lda.
8.2
Warranty
This product, composed by the electronic controller and accessories, was constructed and tested in accordance with the
security measures applicable to electronic devices and has undergone the most rigorous quality controls, leaving the factory in
perfect condition.
This warranty applies to products manufactured by Bright Blue Ltd, in accordance with the terms and conditions of the
company.
The Bright Blue Ltd guarantees the product manufactured in accordance with the conditions and responsibilities of these
terms for a period of:
•
ELECTRAL: 2 years or 6.000h of operation; 12 months for temperature probes, except ware out.
The Bright Blue Ltd reserves the right to change the terms and conditions of this warranty, without notice, even after the
invoice date of purchase, applying the terms and conditions in force.
8.3
Warranty Exclusions
Warranty and Responsibility does not apply to:
•
accessories, consumables and peripherals that are not included in the original product package and/or that have been
purchased to other companies;
•
original identification marks that have been torn, changed or removed from the equipment or product;
•
S/N that have been torn, changed or removed from the equipment and/or from its components;
•
flaws and defects due to accidents, negligence or improper use of the equipment and its components; flaws and
defects from improper electrical installation; unusual physical or electrical stress; disrespect for environmental rules,
abnormal conditions of temperature, moisture, corrosive matters or other climate conditions that spread beyond the
predefined limits;
•
operation beyond capacity, failure to report to Bright Blue within the warranty period, substitution of parts not
approved by Bright Blue, failure or damage due to misapplication, lack of proper maintenance, abuse or improper
installation;
•
use and operation of the equipment, or product, in contradiction to the system’s documentation written by Bright
Blue;
•
system failure that according to Bright Blue is not due to raw material defect or fabrication deficiency;
•
system failure caused by inadequate supervision of the components that are subject to wear down or breakdown;
•
product alteration and/or repair by unauthorized personnel and/or unapproved by Bright Blue;
•
customers that did not follow the procedures described in this specified warranty;
This warranty substitutes all others, explicit or implicit, including, but not limiting itself to implicit commercial warranties and
adequacy to a predetermined objective of the equipment and corresponding documentation;
Bright Blue’s responsibility is limited to repair and/or substitution of product components as long as none of the warranty
exclusion conditions is met.
Under any circumstance is Bright Blue responsible for any cost, tax, expense, loss or damage of any kind, directly or
indirectly, consequential or accidental, including, but not limited to ceasing profits.
The present limited responsibility represents the overall responsibility assumed by Bright Blue concerning its products,
articles, goods, and provided services. Bright Blue will not have an further obligation or responsibility, moral or otherwise.
Nevertheless, its responsibility limitation does not affect or limit the customer’s legal rights in any way in regards to the sale of
consumer goods and investment in its country.
Bright Blue does not take responsibility for any delay or fault caused by circumstances outside its control. Possible situation
include, but are not limited to, interrupted communications services, carrier delays, errors or interruptions that impede the
delivery of goods, unexpected situations, climatic conditions, strikes, inability to establish contact the customer or any responsible
entity to report and/or confirm the situation.
Any technical assistance necessary will be provided within Bright Blue’s factory and never on site of installation. The freight
cost from the site to the factory will is the responsibility of the client.
If Bright Blue, or its representative, determines that the equipment repair is covered by the warranty period and conditions,
the costs of analysis, repair and transportation back to the site will be the responsibility of Bright Blue, or its representative.
If Bright Blue, or its representative, determines that the repair is not covered by the warranty clauses, for the reasons
explained above, it will not be concluded until integral payment of the invoice issued. In this case, Bright Blue or its representative
will send the customer an estimate of the diagnosis, repair and transportation costs. The customer can order the return of the
goods, without repair, in which case Bright Blue will issue an invoice of the diagnosis fee and dispatch costs. If the customer
requires the repair, Bright Blue will charge the repair and transportation costs. The goods will be returned after full payment.
Summary of Contents for ELECTRAL
Page 2: ......
